Owning a Hisun UTV can be a lot of fun, but it can also be frustrating when things go wrong. Fortunately, most of the common problems with these vehicles are easy to fix. This blog post will discuss 10 of the most common Hisun UTV problems and how to fix them. Keep reading for helpful tips and advice!

Is Hisun a good UTV?

Hisun is an outstanding UTV for anyone looking for adventure. Whether you are a professional off-roading enthusiast or just looking to get out and have some fun, Hisun has the power and performance needed to help create some unforgettable memories. Featuring rigid steel construction and all-terrain tires, the Hisun line of UTVs ensures a smooth ride no matter the terrain. Not to mention, they look great doing it! Extra special features like adjustable shocks, air snorkels, reinforced Sparco seats, and powerful engines ensure that any excursion is more than satisfying—it’s downright thrilling.

What Are The Most Common Hisun UTV Problems?

Here are the 10 most common Hisun UTV problems and how to fix them:

1. Overheating

Several things, including a clogged radiator, a faulty thermostat, and an issue with the cooling fan, can cause overheating. Clogged or worn valves can cause engine and exhaust system leaks. To fix this issue, you must check all these components and replace any faulty ones.

2. Starting Issues

Another common problem with Hisun UTVs is difficulty starting them up. This could be due to a weak or dead battery, corroded cables, or worn spark plugs. To solve this issue, ensure your battery terminals are clean and free from corrosion, check the spark plugs for wear, and inspect the starter motor for damage.

3. Oil Leaks

If your Hisun UTV leaks oil, it could be a faulty seal or gasket. Inspect the parts and replace any that are worn or damaged.

4. Poor Acceleration

An issue can often cause a lack of acceleration with the fuel tank or carburetor. Blockages in the fuel system lines or transmission fuel pump can also be a cause. Check each of these components to ensure they are working correctly, and make sure to replace any that are damaged or worn.

5. Clutch Slippage

Clutch slippage can be caused by a weak clutch spring or worn clutch plates. To solve this problem, inspect the components and replace any worn or damaged ones.

6. Jerky Shifting

A worn clutch cable or low transmission fluid can often cause a shift. Inspect the cable for wear and ensure that your transmission fluid levels are adequate.

7. Brake Failure

If your Hisun UTV is experiencing brake failure, it could be due to air in the brake lines, worn pads, or faulty calipers. Inspect all of these components and replace any that are damaged or worn.

8. Excessive Vibration

An issue can often cause excessive vibration with the tires or suspension system. Ensure all components are in good condition and replace any that need to be replaced. 

9. Electrical Issues

Electrical issues can often be caused by bad fuse or wiring problems. Check your fuses and wiring for any signs of damage, then replace or repair them as necessary.

By following the tips mentioned in this article, you should be able to diagnose and fix the most common Hisun UTV problems easily. If you still have trouble with your UTV vehicle, take it to a professional mechanic for further assistance.

How Do You Troubleshoot And Fix Them?

Troubleshooting and fixing Hisun UTVs can be done by following these steps:

1. Check the engine oil levels and make sure they are full.
2. Inspect the radiator, thermostat, and cooling fan to ensure they are in good working order.
3. Check the battery terminals for corrosion or damage.
4. Examine all spark plugs and replace any worn or damaged ones.
5. Inspect any seals or gaskets for signs of wear or damage and replace them if needed.
6. Ensure the fuel filter and carburetor are clean and debris-free; check the air filter for clogs.

7 . Look at the clutch cable and transmission fluid levels; replace any worn components.

8. Inspect the brakes, tires, and suspension system for any signs of wear or damage; replace as necessary.
9. Check all wiring and fuses for damage; repair or replace them as needed.

10 . If the issue persists after following these steps, take your Hisun UTV to a professional mechanic for further assistance.

Proper Gear Safety For a Hisun UTV?

UTV riding is an exciting activity requiring the necessary gear to ensure optimal safety. The essential gear elements are a helmet, gloves, boots, jersey, pants, and goggles. A good helmet is the most important piece of equipment as it protects the rider from head injuries during a crash and shields them from debris kicked up the trail. This gear should be designed for dirt biking specifically, as regular clothing is not adequately protected and can be uncomfortable.

Gloves should fit snugly but provide maneuverability for shifting gears and manipulating levers. Sturdy boots keep feet warm and help riders grip the footpegs securely while cornering or airborne. Jerseys and pants will help disperse heat generated from the engine heat and protect riders against abrasion. A quality set of goggles should shield eyes from dust while providing adequate peripheral vision so riders can be mindful of their surroundings.

Final Thoughts

Hisun UTVs are reliable vehicles—as long as they are correctly maintained and any issues are promptly addressed. Follow the steps outlined in this article to troubleshoot and fix any Hisun UTV problems, then take necessary measures to ensure optimal performance by following the tips for proper care. With the right maintenance, your Hisun UTV will provide years of reliable, safe, and fun off-roading.

If you need any parts for your Hisun UTV, LionParts has you covered. We offer a wide selection of parts designed to fit all Hisun UTV models, including complete Hisun UTV engines and brakes.