RMStator Stator Kit With , CDI Box And Ignition Coil RM22410
Customer Ratings
RMStator Stator Kit With , CDI Box And Ignition Coil RM22410
RMStator Stator Kit With , CDI Box And Ignition Coil RM22410
Brand New Kit High Output Stator + PeakRPM CDI Box + External Ignition Coil
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
- All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Adjustable timing plate +/- 10 degrees included
- 75 watts output so you can run brighter lights
- Our PeakRPM CDI Box provides the optimal output for your ride
- Higher grade of electronic components
- The Quality exceeds the OEM equipment
- You must re-install your OEM spark plug cap(s)
- Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install
- Highest grade of lamination materials
Technical Data
Stator Dimensions :
Interior diameter : 25mm
Exterior diameter : 120mm
Thickness : 8mm
Length of wires stator to grommet : 75mm
Length of wires grommet to plug : 400mm
Length of pickup coil's wire to grommet : 135mm
Other specifications :
Number of wires : 5
Number of plugs : 5
Number of pins : 5
Wire to wire resistance :
Alternator : Yellow/Red to Black = 0.4ohms +/-20%
Pickup : White/Red to Black = 20ohms +/-20%
Source : Black/Red to Green/White = 280ohms +/-20%
Dimensions CDI Box :
Height: 40mm
Length: 52mm
Width: 30mm
Other specifications:
Number of plugs: 5
Number of pins: 5
Dimensions External Ignition Coil :
Distance between fixation holes: 60 mm
RMSTATOR are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
We do not just sell electrical parts for powersports, we solve problems. RMSTATOR take pride in designing & manufacturing more efficient parts, providing all the information necessary for an easy and reliable installation, and supporting the customer before, during, and after the sale.
THE POWER IN POWERSPORTS
Brand: RMStator
Part Number: RM22410
Fitment:
- 1988 Yamaha Blaster 200 YFS200
- 1990-2002 Yamaha Blaster 200 YFS200
Note: Image is for reference only, actual product may vary slightly.
RMStator Stator Kit With , CDI Box And Ignition Coil RM22410
Brand New Kit High Output Stator + PeakRPM CDI Box + External Ignition Coil
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
- All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Adjustable timing plate +/- 10 degrees included
- 75 watts output so you can run brighter lights
- Our PeakRPM CDI Box provides the optimal output for your ride
- Higher grade of electronic components
- The Quality exceeds the OEM equipment
- You must re-install your OEM spark plug cap(s)
- Once your OEM spark plug cap(s) are re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install
- Highest grade of lamination materials
Technical Data
Stator Dimensions :
Interior diameter : 25mm
Exterior diameter : 120mm
Thickness : 8mm
Length of wires stator to grommet : 75mm
Length of wires grommet to plug : 400mm
Length of pickup coil's wire to grommet : 135mm
Other specifications :
Number of wires : 5
Number of plugs : 5
Number of pins : 5
Wire to wire resistance :
Alternator : Yellow/Red to Black = 0.4ohms +/-20%
Pickup : White/Red to Black = 20ohms +/-20%
Source : Black/Red to Green/White = 280ohms +/-20%
Dimensions CDI Box :
Height: 40mm
Length: 52mm
Width: 30mm
Other specifications:
Number of plugs: 5
Number of pins: 5
Dimensions External Ignition Coil :
Distance between fixation holes: 60 mm
RMSTATOR are committing to innovate in finding clever ways to design more efficient parts that produce better results than any other part on the market.
We do not just sell electrical parts for powersports, we solve problems. RMSTATOR take pride in designing & manufacturing more efficient parts, providing all the information necessary for an easy and reliable installation, and supporting the customer before, during, and after the sale.
THE POWER IN POWERSPORTS
Brand: RMStator
Part Number: RM22410
Fitment:
- 1988 Yamaha Blaster 200 YFS200
- 1990-2002 Yamaha Blaster 200 YFS200
Note: Image is for reference only, actual product may vary slightly.
