SuperATV Turbo Charged Blow Off Valve BOV-001
Customer Ratings
Customer Reviews
⭐️ Lionparts has awesome customer service and can’t thank them enough for their help in getting my order/setup correct! - Tom M.
⭐️ Best customer service I have experienced in a very long time. Product is high quality and fits perfect - Christy
⭐️ LionParts has been very consistent, and helpful finding the necessary parts for my needs! - Curtis
⭐️ Had an awesome experience with Lionsparts! I bought my KFI snow plow from them through Trevor who was very knowledgeable and helpful! - Eric
SuperATV Turbo Charged Blow Off Valve BOV-001
Questions? Call or text us at:888-927-3076
Item is in stockOnly 0 left in stockItem is out of stock
Item is unavailable
Why We Make It
A broken blow off valve is nothing to mess with and the OEM plastic piece just doesn’t hold up to the power and vibration of the RZR Turbo. SuperATV’s Rev1 aluminum blow off valve is your answer for replacing a critical component that often fails within the first year. If you’re noticing a loss of power, your OEM blow off valve is the likely culprit.
The REV1 Blow Off Valve
Each blow off valve is constructed of 6061 aluminum, leaving you with a high quality part that is guaranteed to last you mile after grueling mile. The RZR Turbo blow off valve comes black and anodized and utilizes a must-have fully recirculating valve that accurately directs all turbo pressure back into your intake system - right where you want it for taking full advantage of your turbo system. The fully sealed design keeps out dust and debris like a boss. So whether you are blasting through the desert or sloshing through the mud, SuperATV's Rev1 blow off valve has you covered and you will keep you running strong.
How to know if your blow off valve is bad
The factory Polaris blow off valve is constructed of a plastic material that is barely good enough to get the job done. Problems arise when your blow off valve fails to open properly – from either sticking or cracking. When this happens your RZR will go into limp mode, lose power, or throw on a check engine light. Although a combination of other problems can cause these errors, a faulty blow off valve is the most common.
$176.62
A broken blow off valve is nothing to mess with and the OEM plastic piece just doesn’t hold up to the power and vibration of the RZR Turbo. SuperATV’s Rev1 aluminum blow off valve is your answer for replacing a critical component that often fails within the first year. If you’re noticing a loss of power, your OEM blow off valve is the likely culprit.
The REV1 Blow Off Valve
Each blow off valve is constructed of 6061 aluminum, leaving you with a high quality part that is guaranteed to last you mile after grueling mile. The RZR Turbo blow off valve comes black and anodized and utilizes a must-have fully recirculating valve that accurately directs all turbo pressure back into your intake system - right where you want it for taking full advantage of your turbo system. The fully sealed design keeps out dust and debris like a boss. So whether you are blasting through the desert or sloshing through the mud, SuperATV's Rev1 blow off valve has you covered and you will keep you running strong.
How to know if your blow off valve is bad
The factory Polaris blow off valve is constructed of a plastic material that is barely good enough to get the job done. Problems arise when your blow off valve fails to open properly – from either sticking or cracking. When this happens your RZR will go into limp mode, lose power, or throw on a check engine light. Although a combination of other problems can cause these errors, a faulty blow off valve is the most common.
- Constructed of 6061 aluminum - black anodized
- Fully sealed design keeps out dust and debris
- Direct replacement for your plastic OEM valve
| Check Engine Codes for boost conditions |
|---|
| 1127-0: Valid but above normal |
| 1127-3: Above normal, Over boost |
| 1127-4: Below normal, Under boost |
| 1127-31: Condition exists |
Fitment:
- Polaris RZR XP Turbo : 2016+
- Polaris RZR XP 4 Turbo : 2016+
- Polaris RZR XP Turbo S : 2018+
- Polaris RZR XP 4 Turbo S : 2019+
- Polaris RZR PRO XP : 2020+
- Polaris RZR PRO XP 4 : 2020+
Brand: SuperATV
Part Number: BOV-001
×
Please wait...
Make An Offer
SuperATV Turbo Charged Blow Off Valve BOV-001
$176.62
SuperATV Turbo Charged Blow Off Valve BOV-001
$176.62
Why We Make It
A broken blow off valve is nothing to mess with and the OEM plastic piece just doesn’t hold up to the power and vibration of the RZR Turbo. SuperATV’s Rev1 aluminum blow off valve is your answer for replacing a critical component that often fails within the first year. If you’re noticing a loss of power, your OEM blow off valve is the likely culprit.
The REV1 Blow Off Valve
Each blow off valve is constructed of 6061 aluminum, leaving you with a high quality part that is guaranteed to last you mile after grueling mile. The RZR Turbo blow off valve comes black and anodized and utilizes a must-have fully recirculating valve that accurately directs all turbo pressure back into your intake system - right where you want it for taking full advantage of your turbo system. The fully sealed design keeps out dust and debris like a boss. So whether you are blasting through the desert or sloshing through the mud, SuperATV's Rev1 blow off valve has you covered and you will keep you running strong.
How to know if your blow off valve is bad
The factory Polaris blow off valve is constructed of a plastic material that is barely good enough to get the job done. Problems arise when your blow off valve fails to open properly – from either sticking or cracking. When this happens your RZR will go into limp mode, lose power, or throw on a check engine light. Although a combination of other problems can cause these errors, a faulty blow off valve is the most common.
Read More
A broken blow off valve is nothing to mess with and the OEM plastic piece just doesn’t hold up to the power and vibration of the RZR Turbo. SuperATV’s Rev1 aluminum blow off valve is your answer for replacing a critical component that often fails within the first year. If you’re noticing a loss of power, your OEM blow off valve is the likely culprit.
The REV1 Blow Off Valve
Each blow off valve is constructed of 6061 aluminum, leaving you with a high quality part that is guaranteed to last you mile after grueling mile. The RZR Turbo blow off valve comes black and anodized and utilizes a must-have fully recirculating valve that accurately directs all turbo pressure back into your intake system - right where you want it for taking full advantage of your turbo system. The fully sealed design keeps out dust and debris like a boss. So whether you are blasting through the desert or sloshing through the mud, SuperATV's Rev1 blow off valve has you covered and you will keep you running strong.
How to know if your blow off valve is bad
The factory Polaris blow off valve is constructed of a plastic material that is barely good enough to get the job done. Problems arise when your blow off valve fails to open properly – from either sticking or cracking. When this happens your RZR will go into limp mode, lose power, or throw on a check engine light. Although a combination of other problems can cause these errors, a faulty blow off valve is the most common.
- Constructed of 6061 aluminum - black anodized
- Fully sealed design keeps out dust and debris
- Direct replacement for your plastic OEM valve
| Check Engine Codes for boost conditions |
|---|
| 1127-0: Valid but above normal |
| 1127-3: Above normal, Over boost |
| 1127-4: Below normal, Under boost |
| 1127-31: Condition exists |
Fitment:
- Polaris RZR XP Turbo : 2016+
- Polaris RZR XP 4 Turbo : 2016+
- Polaris RZR XP Turbo S : 2018+
- Polaris RZR XP 4 Turbo S : 2019+
- Polaris RZR PRO XP : 2020+
- Polaris RZR PRO XP 4 : 2020+
Brand: SuperATV
Part Number: BOV-001