GPR Satinox Slip-on Exhaust For Yamaha XJR1300 2007-2017 Y.84.SAT
Customer Ratings
Customer Reviews
⭐️ Lionparts has awesome customer service and can’t thank them enough for their help in getting my order/setup correct! - Tom M.
⭐️ Best customer service I have experienced in a very long time. Product is high quality and fits perfect - Christy
⭐️ LionParts has been very consistent, and helpful finding the necessary parts for my needs! - Curtis
⭐️ Had an awesome experience with Lionsparts! I bought my KFI snow plow from them through Trevor who was very knowledgeable and helpful! - Eric
GPR Satinox Slip-on Exhaust For Yamaha XJR1300 2007-2017 Y.84.SAT
Questions? Call or text us at:888-927-3076
Item is in stockOnly 0 left in stockItem is out of stock
Item is unavailable
GPR Satinox Slip-on Muffler Exhaust For Yamaha XJR1300 2007-2017
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.GPR's Satinox silencer is made of 304 stainless steel. It has an oval shape with a diameter of 3.5 inches x 4.7 inches (90MM x 120MM).
FEATURES
SOUND: Upgraded sound from stock exhaust. Although louder than stock, this exhaust produces the softest sound of all the GPR exhausts.
PERFORMANCE: Upgraded performance from stock exhaust
QUALITY: Italian made with high-grade welding
WEIGHT: Lighter than stock exhaust
This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
This is an original GPR product, developed after GPR's experience in the World Championship. It offers an innovative design, improved performance, weight savings and a full-bodied sound.
Made in Italy with a 2-year international warranty.
Tampering with the DB Killer welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads does not comply with regulations governing circulation on the public road network.
This kit is homologated for noise only. Please check whether a catalyst is necessary within your country to be road-legal and to pass any local inspections.
GPR Products are plug-and-play. However, we do recommend a professional installation.
EPA declaration alone, without the CARB certificate, may be rejected by local authorities in some states such as California. Please contact Lion Parts to ensure that the item arrives with the correct approvals that must also comply with local legislation.
Brand: GPR
Part Number: Y.84.SAT
Fitment:
- Yamaha XJR1300 2007-2017
Note: Image is for reference only, actual product may vary slightly.
GPR Satinox Slip-on Muffler Exhaust For Yamaha XJR1300 2007-2017
To install, no structural modifications are required. GPR recommends reading the included instructions or tutorial on http://www.gpr.it or the GPR channel on Youtube.
The exhaust has a removable db killer (noise restrictor) for racing use. Removing the DB Killer is ILLEGAL and the customer assumes the responsibility if they use the motorbike as on the circuits only, without bags, without flash lights, number plate holder or other parts that would conflict with the different angle of the gas following the transformation into the racing version. Abuse of this situation on the road will result in the loss of the product warranty and any refund request will be rejected.
The warranty is two years from the purchase, with right of reparation with a return to the GPR factory, or the nearest official distributor at the customer's expense.
GPR will not provide a new silencer, but will repair the original silencer. The customer must accept to remount the original exhaust or wait the standard time for the repair.
This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.GPR's Satinox silencer is made of 304 stainless steel. It has an oval shape with a diameter of 3.5 inches x 4.7 inches (90MM x 120MM).
FEATURES
SOUND: Upgraded sound from stock exhaust. Although louder than stock, this exhaust produces the softest sound of all the GPR exhausts.
PERFORMANCE: Upgraded performance from stock exhaust
QUALITY: Italian made with high-grade welding
WEIGHT: Lighter than stock exhaust
This kit includes the specific link pipe or half-manifold with specific appropriate brackets and accessories. This allows for installation without any structural modifications.
This is an original GPR product, developed after GPR's experience in the World Championship. It offers an innovative design, improved performance, weight savings and a full-bodied sound.
Made in Italy with a 2-year international warranty.
Tampering with the DB Killer welding or antitampering screws or fastener is illegal for road use within the EU directives. It is permitted only for RACING use in the circuits. The use of the open version (without the DB Killer) on roads does not comply with regulations governing circulation on the public road network.
This kit is homologated for noise only. Please check whether a catalyst is necessary within your country to be road-legal and to pass any local inspections.
GPR Products are plug-and-play. However, we do recommend a professional installation.
EPA declaration alone, without the CARB certificate, may be rejected by local authorities in some states such as California. Please contact Lion Parts to ensure that the item arrives with the correct approvals that must also comply with local legislation.
Brand: GPR
Part Number: Y.84.SAT
Fitment:
- Yamaha XJR1300 2007-2017
Note: Image is for reference only, actual product may vary slightly.
