High Lifter Front Forward Upper And Lower Black Control Arms With Ball Joints For Polaris Models MCFFA-GEN1-1-B-BJI
Customer Ratings
High Lifter Front Forward Upper And Lower Black Control Arms With Ball Joints For Polaris Models MCFFA-GEN1-1-B-BJI
High Lifter Front Forward Upper And Lower Black Control Arms With Ball Joints
NOTES:
Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires. This kit comes with the ball joints preinstalled.
Description:
- High Lifters service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured.
- Purchasing control arms with the ball joints already installed prevents damage due to improper installation, which is not covered by High Lifters Lifetime Warranty.
- The Max Clearance Front Forward Upper & Lower Control Arms move the front hubs forward 1.5 inches for clearance without lifting the ride or increasing the center of gravity.
- The upper and lower control arms are crafted from heavy-duty 1 1/4 steel tubing.
- The upper control arms have the High Lifter logo precision cut into the bracing so fellow riders know you mean business when it comes to heavy-duty accessories for your Polaris General.
- During installation, you'll use stock bushings and factory ball joints for an easy install! Tire Fitment: Up to 31".
- Our stated tire fitment guide is a general fitment and is in no way guaranteed.
- Tires and lifts vary by manufacturer and tire fitment can be affected by other modifications.
- Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
- Ball Joints included.
Brand: High Lifter
Part Number: MCFFA-GEN1-1-B-BJI
Fitment:
- 2017-2021 Polaris General 1000 Deluxe EPS
- 2017-2020 Polaris General 1000 EPS
- 2018-2021 Polaris General 1000 Premium EPS
- 2018 Polaris General 1000 Ride Command Edition EPS
- 2021 Polaris General 1000 Sport
- 2020-2021 Polaris General 4 1000 Deluxe EPS
- 2017-2020 Polaris General 4 1000 EPS
- 2021 Polaris General 4 1000 Premium EPS
- 2017 Polaris RZR 4 900 EPS
- 2017-2020 Polaris RZR S 1000 EPS
- 2017 Polaris RZR S 900 BASE
- 2018-2020 Polaris RZR S 900
- 2017 Polaris RZR S 900 EPS
- 2020 Polaris RZR S 900 Premium
- 2019-2020 Polaris RZR S4 1000 EPS
- 2018 Polaris RZR S4 900 EPS
- 2021 Polaris RZR Trail S 1000 Premium
- 2021 Polaris RZR Trail S 1000 Ultimate
- 2021 Polaris RZR Trail S 900 Premium
- 2021 Polaris RZR Trail S 900 Sport
Note: Image is for reference only, actual product may vary slightly.
High Lifter Front Forward Upper And Lower Black Control Arms With Ball Joints
NOTES:
Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires. This kit comes with the ball joints preinstalled.
Description:
- High Lifters service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured.
- Purchasing control arms with the ball joints already installed prevents damage due to improper installation, which is not covered by High Lifters Lifetime Warranty.
- The Max Clearance Front Forward Upper & Lower Control Arms move the front hubs forward 1.5 inches for clearance without lifting the ride or increasing the center of gravity.
- The upper and lower control arms are crafted from heavy-duty 1 1/4 steel tubing.
- The upper control arms have the High Lifter logo precision cut into the bracing so fellow riders know you mean business when it comes to heavy-duty accessories for your Polaris General.
- During installation, you'll use stock bushings and factory ball joints for an easy install! Tire Fitment: Up to 31".
- Our stated tire fitment guide is a general fitment and is in no way guaranteed.
- Tires and lifts vary by manufacturer and tire fitment can be affected by other modifications.
- Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
- Ball Joints included.
Brand: High Lifter
Part Number: MCFFA-GEN1-1-B-BJI
Fitment:
- 2017-2021 Polaris General 1000 Deluxe EPS
- 2017-2020 Polaris General 1000 EPS
- 2018-2021 Polaris General 1000 Premium EPS
- 2018 Polaris General 1000 Ride Command Edition EPS
- 2021 Polaris General 1000 Sport
- 2020-2021 Polaris General 4 1000 Deluxe EPS
- 2017-2020 Polaris General 4 1000 EPS
- 2021 Polaris General 4 1000 Premium EPS
- 2017 Polaris RZR 4 900 EPS
- 2017-2020 Polaris RZR S 1000 EPS
- 2017 Polaris RZR S 900 BASE
- 2018-2020 Polaris RZR S 900
- 2017 Polaris RZR S 900 EPS
- 2020 Polaris RZR S 900 Premium
- 2019-2020 Polaris RZR S4 1000 EPS
- 2018 Polaris RZR S4 900 EPS
- 2021 Polaris RZR Trail S 1000 Premium
- 2021 Polaris RZR Trail S 1000 Ultimate
- 2021 Polaris RZR Trail S 900 Premium
- 2021 Polaris RZR Trail S 900 Sport
Note: Image is for reference only, actual product may vary slightly.
