High Lifter 5" Spring Spacer Lift Kit For Polaris Models PLKRZRPRO-00
Customer Ratings
Customer Reviews
⭐️ Lionparts has awesome customer service and can’t thank them enough for their help in getting my order/setup correct! - Tom M.
⭐️ Best customer service I have experienced in a very long time. Product is high quality and fits perfect - Christy
⭐️ LionParts has been very consistent, and helpful finding the necessary parts for my needs! - Curtis
⭐️ Had an awesome experience with Lionsparts! I bought my KFI snow plow from them through Trevor who was very knowledgeable and helpful! - Eric
High Lifter 5" Spring Spacer Lift Kit For Polaris Models PLKRZRPRO-00
Questions? Call or text us at:888-927-3076
Item is in stockOnly 0 left in stockItem is out of stock
Item is unavailable
High Lifter 5" Spring Spacer Lift Kit PLKRZRPRO-00
NOTES:
Get the lift needed for tighter suspension and larger tires on your Polaris RZR PRO XP! Our lift consistently measures truer (and higher) than the competition. This is a spring lift kit that maximizes lift without severe axle angles. Shock adjusters are set at factory (stock) pre-load. Springs are silver.
Description:
- High Lifters 5" Spring Lift kit .
- Increase your ground clearance and make room for larger tires to dig deep and ride hard in almost any terrain.
- Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit .5" Spring Lift kit Features high tensile alloy spring steel for strength and longevity.
- Springs designed to be longer than stock front spring is two inches longer and the rear is three inches longer than the factory springs.
- Increased front wire diameter by 11% and rear by 22%.
- Front gains 3" ground clearance at factory settings, rear gains 5" of additional ground clearance.
- Customer can adjust the springs to their preferred ride quality and height.
- Spring Rate is 300lbs/inch front & rear.
- All hardware needed for successful installation.
- User-friendly instructions.
- Tire fitment: Up to 35".
- Our tire fitment guide is a general fitment and is in no way guaranteed.
- Tires and lifts vary by manufacturer and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width.
- Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
- Powder coating springs will VOID the warranty.
Brand: High Lifter
Part Number: PLKRZRPRO-00
Fitment:
- 2020 Polaris RZR Pro XP
- 2020 Polaris RZR Pro XP Orange Madness LE
- 2020-2021 Polaris RZR Pro XP Premium
- 2021 Polaris RZR Pro XP Sport
- 2021 Polaris RZR Pro XP Sport Rockford Fosgate LE
- 2020-2021 Polaris RZR Pro XP Ultimate
- 2021 Polaris RZR Pro XP Ultimate Rockford Fosgate LE
- 2020 Polaris RZR PRO XP 4
- 2020 Polaris RZR PRO XP 4 Orange Madness LE
- 2020-2021 Polaris RZR PRO XP 4 Premium
- 2021 Polaris RZR PRO XP 4 Sport
- 2021 Polaris RZR PRO XP 4 Sport Rockford Fosgate LE
- 2020-2021 Polaris RZR PRO XP 4 Ultimate
- 2021 Polaris RZR PRO XP 4 Ultimate Rockford Fosgate LE
Note: Image is for reference only, actual product may vary slightly.
High Lifter 5" Spring Spacer Lift Kit PLKRZRPRO-00
NOTES:
Get the lift needed for tighter suspension and larger tires on your Polaris RZR PRO XP! Our lift consistently measures truer (and higher) than the competition. This is a spring lift kit that maximizes lift without severe axle angles. Shock adjusters are set at factory (stock) pre-load. Springs are silver.
Description:
- High Lifters 5" Spring Lift kit .
- Increase your ground clearance and make room for larger tires to dig deep and ride hard in almost any terrain.
- Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit .5" Spring Lift kit Features high tensile alloy spring steel for strength and longevity.
- Springs designed to be longer than stock front spring is two inches longer and the rear is three inches longer than the factory springs.
- Increased front wire diameter by 11% and rear by 22%.
- Front gains 3" ground clearance at factory settings, rear gains 5" of additional ground clearance.
- Customer can adjust the springs to their preferred ride quality and height.
- Spring Rate is 300lbs/inch front & rear.
- All hardware needed for successful installation.
- User-friendly instructions.
- Tire fitment: Up to 35".
- Our tire fitment guide is a general fitment and is in no way guaranteed.
- Tires and lifts vary by manufacturer and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width.
- Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
- Powder coating springs will VOID the warranty.
Brand: High Lifter
Part Number: PLKRZRPRO-00
Fitment:
- 2020 Polaris RZR Pro XP
- 2020 Polaris RZR Pro XP Orange Madness LE
- 2020-2021 Polaris RZR Pro XP Premium
- 2021 Polaris RZR Pro XP Sport
- 2021 Polaris RZR Pro XP Sport Rockford Fosgate LE
- 2020-2021 Polaris RZR Pro XP Ultimate
- 2021 Polaris RZR Pro XP Ultimate Rockford Fosgate LE
- 2020 Polaris RZR PRO XP 4
- 2020 Polaris RZR PRO XP 4 Orange Madness LE
- 2020-2021 Polaris RZR PRO XP 4 Premium
- 2021 Polaris RZR PRO XP 4 Sport
- 2021 Polaris RZR PRO XP 4 Sport Rockford Fosgate LE
- 2020-2021 Polaris RZR PRO XP 4 Ultimate
- 2021 Polaris RZR PRO XP 4 Ultimate Rockford Fosgate LE
Note: Image is for reference only, actual product may vary slightly.
