High Lifter 6" Black Big Lift Kit With DHT XL Axles For Can-Am Models CLK-DXL-C1R-1-B
Customer Ratings
High Lifter 6" Black Big Lift Kit With DHT XL Axles For Can-Am Models CLK-DXL-C1R-1-B
High Lifter 6" Black Big Lift Kit With DHT XL Axles CLK-DXL-C1R-1-B
NOTES:
This 6" Big Lift is engineered for maximum performance and gives the smoothest ride in the toughest terrain and riding conditions. Go deep and hit it hard with this precision fitting kit built to last. The 10" track width increases front and rear for stability and ride comfort. Max Clearance Arms include a Lifetime Warranty. Go ahead and run 32.5" Outlaw 2s and dominate the competition with this Renegade 6" Big Lift. This kit comes powder-coated in black, red, and yellow. Kits are available raw or in custom colors.
Bigger. Badder. BOLDER. Take your SXS to the edge with High Lifters 6" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.
Each lift kit comes with four Outlaw RCV Axles or four Outlaw DHT XL Axles that are custom tuned for use with the 6 High Lifter Lift Kit.
Outlaw DHT XL Axle:
- Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
- Oversized CV joint housings to increase strength
- Housings and bars made from 4340 Chromoly steel
- Puncture-resistant boots which are durable in high and low temperature climates
- Molybdenum disulfide, anti-oxidation, rustproof, and high-performance
This 6" lift kit package includes the following components:
- 10" Increased Track Width
- Heavy Duty Laser Cut Front & Rear Upper Lift and Shock Relocation Brackets
- Heavy Duty Max Clearance Front Control Arms (1 1/4 " DOM) Heavy Duty Rear Trailing Arms (2" DOM) with Additional Support Gussets & Shock Mounts
- 4 Custom Outlaw DHT XL Axles
- New Tie Rod Set Up for Smooth & Easy Steering
- New Front & Rear Brake Line Kits
- All Hardware & Brackets
- All Lift Brackets, Control Arms, Trailing Arms & Tie Rods come with a Durable Powder Coated Finish
- Detailed Instructions with Installation Photos
Tire Fitment:
Up to 32.5" OL2
Up to 33" OL3
Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Note: Images reflect custom colors. This kit comes powder-coated in black, red, and yellow.
Brand: High Lifter
Part Number: CLK-DXL-C1R-1-B
Fitment:
- 2020 Can-Am Renegade 1000 4x4 XXC
- 2020 Can-Am Renegade 1000R 4x4 XMR DPS
- 2020 Can-Am Renegade 1000R 4x4 XXC DPS
- 2020 Can-Am Renegade 850 4X4
- 2020 Can-Am Renegade 850 4x4 XXC DPS
Note: Image is for reference only, actual product may vary slightly.
High Lifter 6" Black Big Lift Kit With DHT XL Axles CLK-DXL-C1R-1-B
NOTES:
This 6" Big Lift is engineered for maximum performance and gives the smoothest ride in the toughest terrain and riding conditions. Go deep and hit it hard with this precision fitting kit built to last. The 10" track width increases front and rear for stability and ride comfort. Max Clearance Arms include a Lifetime Warranty. Go ahead and run 32.5" Outlaw 2s and dominate the competition with this Renegade 6" Big Lift. This kit comes powder-coated in black, red, and yellow. Kits are available raw or in custom colors.
Bigger. Badder. BOLDER. Take your SXS to the edge with High Lifters 6" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.
Each lift kit comes with four Outlaw RCV Axles or four Outlaw DHT XL Axles that are custom tuned for use with the 6 High Lifter Lift Kit.
Outlaw DHT XL Axle:
- Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
- Oversized CV joint housings to increase strength
- Housings and bars made from 4340 Chromoly steel
- Puncture-resistant boots which are durable in high and low temperature climates
- Molybdenum disulfide, anti-oxidation, rustproof, and high-performance
This 6" lift kit package includes the following components:
- 10" Increased Track Width
- Heavy Duty Laser Cut Front & Rear Upper Lift and Shock Relocation Brackets
- Heavy Duty Max Clearance Front Control Arms (1 1/4 " DOM) Heavy Duty Rear Trailing Arms (2" DOM) with Additional Support Gussets & Shock Mounts
- 4 Custom Outlaw DHT XL Axles
- New Tie Rod Set Up for Smooth & Easy Steering
- New Front & Rear Brake Line Kits
- All Hardware & Brackets
- All Lift Brackets, Control Arms, Trailing Arms & Tie Rods come with a Durable Powder Coated Finish
- Detailed Instructions with Installation Photos
Tire Fitment:
Up to 32.5" OL2
Up to 33" OL3
Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Note: Images reflect custom colors. This kit comes powder-coated in black, red, and yellow.
Brand: High Lifter
Part Number: CLK-DXL-C1R-1-B
Fitment:
- 2020 Can-Am Renegade 1000 4x4 XXC
- 2020 Can-Am Renegade 1000R 4x4 XMR DPS
- 2020 Can-Am Renegade 1000R 4x4 XXC DPS
- 2020 Can-Am Renegade 850 4X4
- 2020 Can-Am Renegade 850 4x4 XXC DPS
Note: Image is for reference only, actual product may vary slightly.
