High Lifter Ball Joint Press, Transmission Alignment Kit, Snorkel Tool Set HL-TOOL-BUNDLE
Customer Ratings
High Lifter Ball Joint Press, Transmission Alignment Kit, Snorkel Tool Set HL-TOOL-BUNDLE
High Lifter Ball Joint Press, Transmission Alignment Kit, Snorkel Tool Set
NOTES:
The Ball Joint Installation Tool, Snorkel Gear Transmission Tool and Alignment Kit were all designed by offroad enthusiasts for offroad enthusiasts! Save your time and money when purchasing this service pack bundle!
High Lifter Alignment Kit Tool
- Easy to use ? bolt plates to the hubs on each side, front or rear.
- Measure TOE directly using the 2 tape measures included in the kit.
- Measure CAMBER using the magnetic, digital angle finder that is provided in the kit.
- Aligning a vehicle after replacing suspension components (tie rods, control arms, etc.).
- Making camber/toe alignment changes in your garage or on the trail.
- Adjusting alignment to your desired specifications.
- Prevents uneven wear pattern on tires.
- Correct offset steering wheel.
- Correct steering pull while driving
High Lifter Snorkel Gear Transmission Tool for Polaris Transmissions
- Hardened 5140 alloy steel components with zinc finish.
- Tool body accepts a 40mm wrench or socket as well as a 1/2in square drive to aid in installation and removal.
- 3 heads to adapt the tool for different applications.
- Two heads machined and one with replaceable extended tip set screws.
- 2 thread cleaning taps to remove chips and burs from transmission case.
- Components secured with 8mm grade 12.9 bolts.
- Pins to aid in tool assembly.
- Installation tools and hardware included with replacement pins and bolts.Main tool has precision pins align the pin slots in the snorkel gear nut .
- Constructed of plain carbon steel, with 5 dowel pins for easy insertion.
- Smooth chrome finish for easy cleaning.
- Additional interchangeable caps that allow the tool to work on multiple transmissions.
- Caps have alignment pins and magnets to lock and secure them to the main tool.
- Makes for easy change out!.
- Can be used with a 1/2" square drive ratchet for easy removal or insertion of the snorkel tube
High Lifter Ball Joint Installation Tool
- Changing This kit was designed to specifically fit ATV and UTV ball joints with ease in mind.
- It even allows for the changing of a ball joint while an arm is still installed.
Brand: High Lifter
Part Number: HL-TOOL-BUNDLE
Note: Image is for reference only, actual product may vary slightly.
High Lifter Ball Joint Press, Transmission Alignment Kit, Snorkel Tool Set
NOTES:
The Ball Joint Installation Tool, Snorkel Gear Transmission Tool and Alignment Kit were all designed by offroad enthusiasts for offroad enthusiasts! Save your time and money when purchasing this service pack bundle!
High Lifter Alignment Kit Tool
- Easy to use ? bolt plates to the hubs on each side, front or rear.
- Measure TOE directly using the 2 tape measures included in the kit.
- Measure CAMBER using the magnetic, digital angle finder that is provided in the kit.
- Aligning a vehicle after replacing suspension components (tie rods, control arms, etc.).
- Making camber/toe alignment changes in your garage or on the trail.
- Adjusting alignment to your desired specifications.
- Prevents uneven wear pattern on tires.
- Correct offset steering wheel.
- Correct steering pull while driving
High Lifter Snorkel Gear Transmission Tool for Polaris Transmissions
- Hardened 5140 alloy steel components with zinc finish.
- Tool body accepts a 40mm wrench or socket as well as a 1/2in square drive to aid in installation and removal.
- 3 heads to adapt the tool for different applications.
- Two heads machined and one with replaceable extended tip set screws.
- 2 thread cleaning taps to remove chips and burs from transmission case.
- Components secured with 8mm grade 12.9 bolts.
- Pins to aid in tool assembly.
- Installation tools and hardware included with replacement pins and bolts.Main tool has precision pins align the pin slots in the snorkel gear nut .
- Constructed of plain carbon steel, with 5 dowel pins for easy insertion.
- Smooth chrome finish for easy cleaning.
- Additional interchangeable caps that allow the tool to work on multiple transmissions.
- Caps have alignment pins and magnets to lock and secure them to the main tool.
- Makes for easy change out!.
- Can be used with a 1/2" square drive ratchet for easy removal or insertion of the snorkel tube
High Lifter Ball Joint Installation Tool
- Changing This kit was designed to specifically fit ATV and UTV ball joints with ease in mind.
- It even allows for the changing of a ball joint while an arm is still installed.
Brand: High Lifter
Part Number: HL-TOOL-BUNDLE
Note: Image is for reference only, actual product may vary slightly.
