SPI Top End Gasket Set 09-710061
Customer Ratings
Customer Reviews
⭐️ Lionparts has awesome customer service and can’t thank them enough for their help in getting my order/setup correct! - Tom M.
⭐️ Best customer service I have experienced in a very long time. Product is high quality and fits perfect - Christy
⭐️ LionParts has been very consistent, and helpful finding the necessary parts for my needs! - Curtis
⭐️ Had an awesome experience with Lionsparts! I bought my KFI snow plow from them through Trevor who was very knowledgeable and helpful! - Eric
SPI Top End Gasket Set 09-710061
Questions? Call or text us at:888-927-3076
Item is in stockOnly 0 left in stockItem is out of stock
Item is unavailable
SPI top end gasket sets contain high performance reed and
base gaskets plus intake exhaust gaskets for a complete cylin-
der rebuild. * Does not include intake exhaust gaskets.
SPI GASKETS ARE MANUFACTURED TO OE-SPECS, WHICH MEANS NO TRIMMING OR FITMENT ISSUES. MATERIALS ARE EXPLICITLY
SELECTED FOR THEIR TEMPERATURE, OIL, FUEL, AND COOLANT-RESISTANT QUALITIES AS WELL AS TESTED USING ASTM STANDARDS. EACH DESIGN IS EVALUATED AGAINST RIGID QUALITY-CONTROL STANDARDS TO ENSURE EACH SET MEETS OR EXCEEDS
OE PERFORMANCE.
AF GASKET MATERIAL
• COMPOSED OF NON-ASBESTOS NITRILE BUTADIENE BONDED CELLULOSE FIBER MATERIALS; THEY ARE COMMONLY USED IN CLUTCH COVER, OIL PUMP, AND COOLANT APPLICATIONS. COMPONENTS MAINTAIN THEIR TENSILE STRENGTH AND TORQUE RETENTION IN OPERATING CONDITIONS OF WELL OVER 300°F.
STEEL & MLS (MULTI-LAYER STEEL) GASKETS
• NO OTHER GASKET IS MORE CRUCIAL THAN YOUR HEAD GASKET. THE SEAL BETWEEN YOUR CYLINDER AND CYLINDER HEAD IS EXPOSED TO MORE HEAT AND EXTREME PRESSURES THAN ANYWHERE ELSE IN YOUR ENGINE. IN ORDER TO MATCH THESE EXTREME CONDITIONS WE OFFER ONE OF THE MOST ADVANCED HEAD GASKETS ON THE MARKET. CONSTRUCTED FROM MULTIPLE LAYERS OF STAINLESS STEEL TO RESIST CORROSION AND EROSIVE CHEMICALS COMMONLY FOUND IN YOUR ENGINE, THEN USING AN ON-OFF PATTERN, OUR MLS GASKETS ARE COATED/EMBOSSED WITH A FLUOROELASTOMER BASED RUBBER TO TIGHTLY SEAL THE METALLIC MATING SURFACES. BY DOING THIS THEY CAN WITHSTAND THE SHEERING FORCES CREATED BY THE TWO SURFACES (CYLINDER HEAD AND CYLINDER). THIS COATING ALSO ENHANCES THE BOND BETWEEN THE GASKET MATERIAL AND THE IMPERFECT SURFACES COMMONLY FOUND WHEN REBUILDING YOUR ENGINE.
SEALS & O-RINGS
• NBR, FLUOROVITON, AND SILICONE ARE SELECTED FOR EACH APPLICATION BASED UPON THE FOLLOWING CHARACTERISTICS: TEMPERATURE RESISTANCE, ABRASION RESISTANCE, CHEMICAL RESISTANCE, AND THEIR ANILINE POINT. A TEFLON COATING IS APPLIED ON CERTAIN APPLICATIONS TO PROLONG PERFORMANCE LIFE.
base gaskets plus intake exhaust gaskets for a complete cylin-
der rebuild. * Does not include intake exhaust gaskets.
SPI GASKETS ARE MANUFACTURED TO OE-SPECS, WHICH MEANS NO TRIMMING OR FITMENT ISSUES. MATERIALS ARE EXPLICITLY
SELECTED FOR THEIR TEMPERATURE, OIL, FUEL, AND COOLANT-RESISTANT QUALITIES AS WELL AS TESTED USING ASTM STANDARDS. EACH DESIGN IS EVALUATED AGAINST RIGID QUALITY-CONTROL STANDARDS TO ENSURE EACH SET MEETS OR EXCEEDS
OE PERFORMANCE.
AF GASKET MATERIAL
• COMPOSED OF NON-ASBESTOS NITRILE BUTADIENE BONDED CELLULOSE FIBER MATERIALS; THEY ARE COMMONLY USED IN CLUTCH COVER, OIL PUMP, AND COOLANT APPLICATIONS. COMPONENTS MAINTAIN THEIR TENSILE STRENGTH AND TORQUE RETENTION IN OPERATING CONDITIONS OF WELL OVER 300°F.
STEEL & MLS (MULTI-LAYER STEEL) GASKETS
• NO OTHER GASKET IS MORE CRUCIAL THAN YOUR HEAD GASKET. THE SEAL BETWEEN YOUR CYLINDER AND CYLINDER HEAD IS EXPOSED TO MORE HEAT AND EXTREME PRESSURES THAN ANYWHERE ELSE IN YOUR ENGINE. IN ORDER TO MATCH THESE EXTREME CONDITIONS WE OFFER ONE OF THE MOST ADVANCED HEAD GASKETS ON THE MARKET. CONSTRUCTED FROM MULTIPLE LAYERS OF STAINLESS STEEL TO RESIST CORROSION AND EROSIVE CHEMICALS COMMONLY FOUND IN YOUR ENGINE, THEN USING AN ON-OFF PATTERN, OUR MLS GASKETS ARE COATED/EMBOSSED WITH A FLUOROELASTOMER BASED RUBBER TO TIGHTLY SEAL THE METALLIC MATING SURFACES. BY DOING THIS THEY CAN WITHSTAND THE SHEERING FORCES CREATED BY THE TWO SURFACES (CYLINDER HEAD AND CYLINDER). THIS COATING ALSO ENHANCES THE BOND BETWEEN THE GASKET MATERIAL AND THE IMPERFECT SURFACES COMMONLY FOUND WHEN REBUILDING YOUR ENGINE.
SEALS & O-RINGS
• NBR, FLUOROVITON, AND SILICONE ARE SELECTED FOR EACH APPLICATION BASED UPON THE FOLLOWING CHARACTERISTICS: TEMPERATURE RESISTANCE, ABRASION RESISTANCE, CHEMICAL RESISTANCE, AND THEIR ANILINE POINT. A TEFLON COATING IS APPLIED ON CERTAIN APPLICATIONS TO PROLONG PERFORMANCE LIFE.
SPI top end gasket sets contain high performance reed and
base gaskets plus intake exhaust gaskets for a complete cylin-
der rebuild. * Does not include intake exhaust gaskets.
SPI GASKETS ARE MANUFACTURED TO OE-SPECS, WHICH MEANS NO TRIMMING OR FITMENT ISSUES. MATERIALS ARE EXPLICITLY
SELECTED FOR THEIR TEMPERATURE, OIL, FUEL, AND COOLANT-RESISTANT QUALITIES AS WELL AS TESTED USING ASTM STANDARDS. EACH DESIGN IS EVALUATED AGAINST RIGID QUALITY-CONTROL STANDARDS TO ENSURE EACH SET MEETS OR EXCEEDS
OE PERFORMANCE.
AF GASKET MATERIAL
• COMPOSED OF NON-ASBESTOS NITRILE BUTADIENE BONDED CELLULOSE FIBER MATERIALS; THEY ARE COMMONLY USED IN CLUTCH COVER, OIL PUMP, AND COOLANT APPLICATIONS. COMPONENTS MAINTAIN THEIR TENSILE STRENGTH AND TORQUE RETENTION IN OPERATING CONDITIONS OF WELL OVER 300°F.
STEEL & MLS (MULTI-LAYER STEEL) GASKETS
• NO OTHER GASKET IS MORE CRUCIAL THAN YOUR HEAD GASKET. THE SEAL BETWEEN YOUR CYLINDER AND CYLINDER HEAD IS EXPOSED TO MORE HEAT AND EXTREME PRESSURES THAN ANYWHERE ELSE IN YOUR ENGINE. IN ORDER TO MATCH THESE EXTREME CONDITIONS WE OFFER ONE OF THE MOST ADVANCED HEAD GASKETS ON THE MARKET. CONSTRUCTED FROM MULTIPLE LAYERS OF STAINLESS STEEL TO RESIST CORROSION AND EROSIVE CHEMICALS COMMONLY FOUND IN YOUR ENGINE, THEN USING AN ON-OFF PATTERN, OUR MLS GASKETS ARE COATED/EMBOSSED WITH A FLUOROELASTOMER BASED RUBBER TO TIGHTLY SEAL THE METALLIC MATING SURFACES. BY DOING THIS THEY CAN WITHSTAND THE SHEERING FORCES CREATED BY THE TWO SURFACES (CYLINDER HEAD AND CYLINDER). THIS COATING ALSO ENHANCES THE BOND BETWEEN THE GASKET MATERIAL AND THE IMPERFECT SURFACES COMMONLY FOUND WHEN REBUILDING YOUR ENGINE.
SEALS & O-RINGS
• NBR, FLUOROVITON, AND SILICONE ARE SELECTED FOR EACH APPLICATION BASED UPON THE FOLLOWING CHARACTERISTICS: TEMPERATURE RESISTANCE, ABRASION RESISTANCE, CHEMICAL RESISTANCE, AND THEIR ANILINE POINT. A TEFLON COATING IS APPLIED ON CERTAIN APPLICATIONS TO PROLONG PERFORMANCE LIFE.
Read More
base gaskets plus intake exhaust gaskets for a complete cylin-
der rebuild. * Does not include intake exhaust gaskets.
SPI GASKETS ARE MANUFACTURED TO OE-SPECS, WHICH MEANS NO TRIMMING OR FITMENT ISSUES. MATERIALS ARE EXPLICITLY
SELECTED FOR THEIR TEMPERATURE, OIL, FUEL, AND COOLANT-RESISTANT QUALITIES AS WELL AS TESTED USING ASTM STANDARDS. EACH DESIGN IS EVALUATED AGAINST RIGID QUALITY-CONTROL STANDARDS TO ENSURE EACH SET MEETS OR EXCEEDS
OE PERFORMANCE.
AF GASKET MATERIAL
• COMPOSED OF NON-ASBESTOS NITRILE BUTADIENE BONDED CELLULOSE FIBER MATERIALS; THEY ARE COMMONLY USED IN CLUTCH COVER, OIL PUMP, AND COOLANT APPLICATIONS. COMPONENTS MAINTAIN THEIR TENSILE STRENGTH AND TORQUE RETENTION IN OPERATING CONDITIONS OF WELL OVER 300°F.
STEEL & MLS (MULTI-LAYER STEEL) GASKETS
• NO OTHER GASKET IS MORE CRUCIAL THAN YOUR HEAD GASKET. THE SEAL BETWEEN YOUR CYLINDER AND CYLINDER HEAD IS EXPOSED TO MORE HEAT AND EXTREME PRESSURES THAN ANYWHERE ELSE IN YOUR ENGINE. IN ORDER TO MATCH THESE EXTREME CONDITIONS WE OFFER ONE OF THE MOST ADVANCED HEAD GASKETS ON THE MARKET. CONSTRUCTED FROM MULTIPLE LAYERS OF STAINLESS STEEL TO RESIST CORROSION AND EROSIVE CHEMICALS COMMONLY FOUND IN YOUR ENGINE, THEN USING AN ON-OFF PATTERN, OUR MLS GASKETS ARE COATED/EMBOSSED WITH A FLUOROELASTOMER BASED RUBBER TO TIGHTLY SEAL THE METALLIC MATING SURFACES. BY DOING THIS THEY CAN WITHSTAND THE SHEERING FORCES CREATED BY THE TWO SURFACES (CYLINDER HEAD AND CYLINDER). THIS COATING ALSO ENHANCES THE BOND BETWEEN THE GASKET MATERIAL AND THE IMPERFECT SURFACES COMMONLY FOUND WHEN REBUILDING YOUR ENGINE.
SEALS & O-RINGS
• NBR, FLUOROVITON, AND SILICONE ARE SELECTED FOR EACH APPLICATION BASED UPON THE FOLLOWING CHARACTERISTICS: TEMPERATURE RESISTANCE, ABRASION RESISTANCE, CHEMICAL RESISTANCE, AND THEIR ANILINE POINT. A TEFLON COATING IS APPLIED ON CERTAIN APPLICATIONS TO PROLONG PERFORMANCE LIFE.
